Ctrl-I: AI control of player car.
Ctrl-T: switch to trackside cameras. Once in this mode + and - cycle through the cams.
[ ]: decrease/increase FOV.
F1: display developer menu.
BACKSPACE: goes back a level in F1 menu.
Ctrl-P: cycle to next post processing filter.
Ctrl-Shift-P: switch post processing filters off.
Ctrl-F: free camera.
Ctrl-S: display FPS (but with renderer debug overhead).
Alt-K: display FPS in HUD (instead of timer).
W,A,S,D: move seat
TAB: cycle lap info
Ctrl-+ & - (Numpad): Full damage/repair damage of car
Alt-+ & - (Numpad): Full damage/repair damage of all cars
shift-alt-H: toggle dirt build-up on cars
ctrl+shift+L: to toggle driving line
F12: take a TGA screenshot (TGA because it has no compression artifacts)
ctrl-F12: take a JPG screenshot
Freecam (CTRL + F)
Left mouse button + mouse movement: change camera direction
F: Toggle Controller bar HUD
CTRL+Shift+F: go to Controller Freecam
R: Change Car View.
CTRL+PGUP/PGDN: Change Car
CTRL+T: TV Cam mode
NumPad +\- : ZoomIn ZoomOut
Enter : Slowmotion (during live race)
P: Freeze/pause (only working on live race)
J:Rewind to the begining of the replay
Tild: debug menu (Actually conflict a lot with onscreen menu keys like Enter key)
Shift/CTRL: Speed modifiers.
Build 396 and up:
Y/H: camera up/down
Q/E: camera movement speed
Z/C: roll camera left/right
CTRL + M: mouse smoothing on/off
NumPad 0: mouse speed scaling (turn rate proportional to square root of movement speed)
Numpad key actions continue working when ctrl or shift is pressed.
Camera Edit Mode (Build 159+)
To enter the mode you press Ctrl-K.
Then the following keys become active:
Numpad 2: increase pitch
Numpad 3: switch lights on/off
Numpad 8: decrease pitch
Numpad 4: increase yaw
Numpad 6: decrease yaw
Numpad 7: increase radius
Numpad 9: decrease radius
Numpad 1: increase roll
Numpad 3: decrease roll
Numpad -: increase FOV
Numpad +: decrease FOV
SHIFT key in combination with any of the above: slow down camera movement
Numpad 5: reset to original settings for current camera
save/load of attached camera state:
Ctrl + F11 - save camera state to current slot
F11- load camera state from current slot
Alt + F11 - move to next slot (wrap to first slot when on last one) and load camera state
Shift + F11 - move to previous slot (wrap to last slot when on first one) and load camera state
Custom DOF mode:
Focus plane distance:
Sharp field depth:
Transit to blur depth:
Shift + F7: decrease
Shift + F8: increase
Shift + F5: decrease
Shift + F6: increase
Auto log-in /USERNAME "????" /PASSWORD "????"
Launch 32bit -x86
Single threaded -dx11st
DirectX 9 -dx9
Disable VR headset support -novr
Access additional cameras -devcameras
Remove crowds -skipcrowds
Disable join in progress (multiplayer) -disablejip